SPLICES • Resin
Resin
3M™ Scotchcast™
Electrical Insulating Resin 4
3M Scotchcast Electrical Insulating Resin 4 is a two-part
epoxy insulating and encapsulating resin packaged in five
sizes. Use 3M Scotchcast Resin 4 to splice solid dielectric
and oil-filled cables up to 8 kV. Flash point: 300°F (149°C)
or higher.
3M™ Scotchcast™ Electrical Insulating
and Sealing Compound 2104
3M Scotchcast Electrical Insulating and Sealing Compound
2104 is a two-part, low-viscosity polyurethane for
permanent splice protection. This resin is included in the
multi-mold splicing kits.
3M™ Scotchcast™ Reenterable Electrical
Insulating and Sealing Compound 2123
Shield electrical connections against water damage with
3M Scotchcast Reenterable Electrical Insulating and
Sealing Compound 2123, the most effective moisture
protection available. Unique mix-in-the-bag preparation
of this polybutadiene resin makes the resin easy to prepare
and apply. The visible, re-enterable moisture seal is a
reliable barrier against the constant exposure to water
in certain applications. Often used for potting flush
mounted junction boxes.
3M™ Scotchcast™ Flame
Retardant Compound 2130
3M Scotchcast Flame Retardant Compound 2130
is a flexible, permanent, urethane resin used for jacket
repair or splicing portable cables. It is flame retardant.
3M™ Scotchcast™ Wet-Niche
Potting Compound 2135
3M Scotchcast Wet-Niche Potting Compound 2135 is the
first 鈥渓isted鈥� product that meets NEC requirements to allow
the use of rigid nonmetallic conduit in the installation
of wet-niche underwater lighting fixtures. 2135 provides
protection against corrosion and possible deteriorating
effects of pool water by reliably encapsulating the 8 AWG
ground connection in a wet-niche shell. The wet-niche
forming shell is a corrosion-resistant metal housing for
underwater fixtures in permanently installed pools. Article
680-20(b)(1) National Electrical Code. UL Listed 2L02.
Scotchcast 2135 potting compound is packaged in an
easy-mix 1.8-oz. Unipak container. This thixotropic resin
will not sag or drip. The encapsulated connection gels in
minutes and can be submerged within four hours. Each kit
contains enough material to complete one fixture.